Software is what we're known for. Hardware is what's next.

The Engineering Wing

This is where Azra Tech designs and builds its own devices. ColdSafe is the first one out the door. More are on the bench right now, and we'll show them when they're ready.

Bench statusUpdated as we build
  1. Project 01ColdSafePilots open
  2. Project 02Not public yetOn the bench
  3. Project 03Not public yetOn the drawing board

On the bench

One device is out in the world. The next ones stay under wraps until they're ready for real businesses to test.

ColdSafe prototype: a Raspberry Pi 5 wired to an LCD display and a temperature sensor
Project 01, pilots open

ColdSafe

Temperature monitoring for refrigerated trucks, freezers, and coolers. Your team gets alerted within about a minute when product is at risk.

Sensors
4, accurate to 0.1 °C
Alerts
About a minute
Power
Wall or battery pack
See ColdSafe
Project 02, on the bench

Project 02

A new device for businesses, with the same idea as ColdSafe: hardware that watches something important and a dashboard your team can check from anywhere.

Purpose
Sensors
Dashboard
Client Portal
Get notified about Project 02
Project 03, on the drawing board

Project 03

Still being designed. We'll share more once there's a working prototype to show.

Purpose
Hardware
Pilots
Waitlist first
Get notified about Project 03

Build log

How ColdSafe went from a single sensor on a desk to pilots with real businesses. New projects get added here as they move.

  1. Done

    First working sensor

    A Raspberry Pi 5 reading a TMP117 precision sensor over I2C, accurate to 0.1 °C, with a live readout on an LCD.

  2. Done

    Live web dashboard

    Charts of recent readings, flags for anything out of range, spreadsheet export, and a warning when the sensor stops reporting.

  3. Now

    Pilots with local businesses

    Units installed with real product, so the alerts get tested where they actually matter.

  4. Next

    Production ColdSafe unit

    Four sensors, a sealed case for cold and moisture, and a battery pack for trucks.

Be first to see what's next.

Join the list and we'll email you when a new device is ready for pilots. Pilot spots go to people on the list first.

One email per launch. No spam, and we never share your address. See our Privacy Policy.

You're on the list.

We'll email you when the next device is ready for pilots.

Hardware builds for companies

Need a device that doesn't exist off the shelf? We design the hardware, write the software that runs it, and build the dashboard your team uses to see the data.

Sensors and monitoring

Devices that measure temperature, motion, power, or anything else your business needs to watch, with alerts when something's wrong.

Raspberry Pi automation

Small computers that run a task around the clock, like logging data, controlling equipment, or connecting old machines to the internet.

Prototypes

A working first version of your idea, built fast enough to test with real users before you commit to a full product.

Dashboards and portals

Every build comes with a web dashboard, so your team can check live readings and history from any phone or computer.

ColdSafe started as one of these builds: a sensor, a Raspberry Pi, and a live dashboard, now turning into a product for cold storage.

Websites we've built

Designed and built from scratch for local businesses, then kept current through the Client Portal.

Velasquez Glass
Velasquez Glass website home page
Velasquez GlassFull site with home, gallery, about, and contact pages.
Lee Tree Visionaries
Lee Tree Visionaries website home page
Lee Tree VisionariesCustom design and build from the ground up.
Bernar Glass Inc
Bernar Glass Inc website home page
Bernar Glass IncCustom design and build from the ground up.

Past builds

The work behind the Wing: a live sensor prototype, university robotics, and the portal our clients use every day.

Live Working prototypeRaspberry Pi 5, TMP117, I2C, web dashboard

ColdSafe temperature monitor

A Raspberry Pi 5 reads a TMP117 precision temperature sensor over I2C. The TMP117 is rated to ±0.1 °C, which is where ColdSafe's accuracy comes from. Each reading shows on a 16x2 LCD on the unit and is sent to a live web dashboard, and a fan controlled by the Pi keeps it cool under constant load.

The dashboard charts the last hour, marks anything outside the safe range, exports readings to a spreadsheet, and warns you when the sensor stops reporting.

Controller
Raspberry Pi 5
Sensor
TMP117, ±0.1 °C, I2C
Display
16x2 LCD, I2C
Cooling
Heatsink and fan
Software
Python on the Pi, web dashboard

This is the working prototype behind ColdSafe. The production unit expands it to four sensors. If the Pi is switched off, the live dashboard will tell you.

ColdSafe prototype hardware: a Raspberry Pi 5 wired to an LCD display and a temperature sensor
The prototype hardware: a Raspberry Pi 5, LCD readout, and temperature sensor.
In use by clientsHTML, Node.js, serverless

Azra Tech Client Portal

A subscription portal I designed, built, and run myself. It handles checkout, gives each client their own dashboard, and keeps their website photos in sync with what they post.

Junior Design, team projectPython, C++

Terrain rover with object detection

A four-wheeled rover built to cross rough, rocky ground. Its camera system detects objects and tracks speed in real time, and spikes on the wheels and chassis keep it stable in bad weather.

Senior Design, team projectC

Robotic arm for drone assembly

A robotic arm that builds a drone by lining up and joining parts that snap together with magnets. I worked on the control logic and fitting the mechanics together.

Personal projectPython, GPIO

Custom Raspberry Pi build

A Raspberry Pi with a custom cooling setup: a heatsink plus a fan controlled through the GPIO pins, so it can run under heavy load for long stretches.

Azra TechHardware

Custom PCs and diagnostics

Building, repairing, and tuning computers for people and businesses. Problems get traced to the exact part, then the fix gets stress-tested.

How every job runs

The same method whether it's a website, an app, or a hardware build.

  1. Diagnose

    Find the real cause before touching anything.

  2. Plan

    Design the fix or the build around how you actually work.

  3. Build

    Write the code or do the hardware work, with updates along the way.

  4. Test

    Stress-test builds, check sites on every device, and confirm the problem is gone.

  5. Support

    Stay on it after delivery so small issues stay small.

Meet the founder

Matthew Bernardino Founder, Computer Engineering student

From fixing computers in 2015 to a business with 45+ clients.

I started Azra Tech in 2015 building and fixing computers. It grew into a full tech business covering websites, software, apps, and PC hardware. I still do the work myself, from the first conversation to ongoing support.

I'm studying Computer Engineering at Loyola University Maryland. The coursework, from circuits to digital logic to computer architecture, is the same foundation I use to diagnose a failing machine or design a client's software.

45+Clients served
2015Azra Tech founded
2027Expected graduation
3Languages: English, Spanish, Turkish

Education

Loyola University Maryland, Baltimore, MD

Bachelor of Computer Engineering

Expected 2027

Relevant coursework

ElectronicsCircuit DesignDigital LogicComputer Architecture Data StructuresSignals and SystemsSenior Design

Experience

  1. 2015 to nowCurrent

    Founder and Technology Specialist at Azra Tech

    Grew Azra Tech from a personal project into a business serving 45+ clients. Design and build software, websites, and client tools. Build, repair, and tune custom computers. Handle every client from the first call to ongoing support.

  2. July 2025 to nowCurrent

    Administrative and Technical Specialist at Lee Tree Technology (LTV)

    Support software development, hardware diagnostics, and web projects, including app development, website builds, and computers built to spec.

  3. Spring 2024

    Tutor at Loyola University Maryland

    One-on-one and small-group help for students, adjusted to how each person learns.

  4. 2018 to 2022

    Administrative Assistant, Web and Construction Support at Bernar Glass

    Supported day-to-day office work and website development, ran social media, and handled customer service.

Toolkit

Software

PythonCC++HTMLNode.jsWeb developmentApp developmentAI tools and data testing

Hardware and embedded

Circuit diagnosticsTroubleshootingCustom PC buildingRaspberry Pi and GPIOI2C sensors and displaysRobotics assembly

Working with clients

Client communicationProject managementFast learningEnglishSpanishTurkish

From the bench

We also build and tune computers. Every machine gets stress-tested before it goes back.

Custom gaming PC build
Custom gaming buildAirflow, cable work, stability tested
PC diagnostics
DiagnosticsRoot cause found and fixed
PC build detail
Build detailsFan curves, BIOS, stress tests

Have something that needs building?

A website, an app, or a hardware build for your company. Tell me what you need and I'll get back to you quickly with a plan and a price.